Impact of Braking and Speed on Current and Voltage in Electric Motorcycles: A Regression Analysis
DOI:
https://doi.org/10.69693/sustainable.v1i1.1Keywords:
Braking, Velocity , Current, VoltageAbstract
The development of electric vehicles is growing rapidly, including electric motorcycles as a solution to overcome the energy crisis and reduce air pollution that occurs. One important aspect is when braking and speeding which can affect the current and voltage in the vehicle's electrical system. This study aims to determine how much influence is produced when braking and speed on current and voltage. This research uses a simple regression analysis method using statistical modelling through SPSS. The results showed that there was an influence of braking and speed on the value of current and voltage produced. When braking with EBS variations of 4%, 8%, and 12% the R Square value is 96.40%, 99.80%, and 99.30% of the current. As for the voltage, the R Square value is 93.70%, 72.30%, 87.70%. The braking results of 4%, 8%, and 12% EBS variations at a speed of 10 km/h produce a current of 0.1 A, 0.5 A, 0.8 A and produce a voltage of 77.33 V, 78.47 V, 78.46 V. At the time of speed, the R Square value is 99% of the current and the R Square value is 96.20% of the voltage. Results with a speed of 10 km/h require a current of 13.5 A and produce a voltage of 77.86 V. This study shows the influence between braking conditions and speed on current and voltage in electric motor vehicles.
Downloads
References
[1] Sun, X., Li, T., Zhu, Z., Lei, G., Guo, Y., & Zhu, J. Speed sensorless model predictive current control based on finite position set for PMSHM drives. IEEE Transactions on Transportation Electrification, 7(4), 2743-2752. 2021. https://doi.org/10.1109/TTE.2021.3081436
[2] Sudjoko, C. Strategi pemanfaatan kendaraan listrik berkelanjutan sebagai solusi untuk mengurangi emisi karbon. Jurnal Paradigma: Jurnal Multidisipliner Mahasiswa Pascasarjana Indonesia, 2(2). 2021. https://doi.org/10.22146/jpmmpi.v2i2.70354
[3] Chiradeja, P., & Ngaopitakkul, A. Analysis of power quality and economic worthiness of electric motorcycle charging in a residential electrical system. IET Electrical Systems in Transportation, 13(1), e12066. 2023. https://doi.org/10.1049/els2.12066
[4] M. Ikhsan, B. Widi, S. Wilyanti, A. Olivia, S. Faizah, And A. Pangestu, “Pengaruh Pembebanan dan Pengaturan Kecepatan Motor Bldc 1 kW pada Sepeda Motor Listrik,” Jurnal Edukasi Elektro, Vol. 6, No. 2, Pp. 149–156, 2022, https://doi.org/10.21831/Jee.V6i2.53318
[5] Rahmadani, C. F. Pencegahan Pelanggaran Lalu Lintas Penggunaan Sepeda Listrik. Jurnal Impresi Indonesia, 2(8), 801-808. 2023. https://doi.org/10.58344/jii.v2i8.3479
[6] Ansah, R., & Susilawati, S. Dampak Kendaraan Listrik Terhadap Lingkungan Dan Sumberdaya Alam: Isu Mutakhir Dalam Transportasi Berkelanjutan. Zahra: Journal Of Health And Medical Research, 3(1), 208-211. 2023
[7] Putra, M. R. A., Nizam, M., & Tjahjana, D. D. D. P. Design of eddy current brake for electric motorcycle braking system. International Journal of Power Electronics and Drive Systems, 12(1), 41. 2021. https://doi.org/10.11591/IJPEDS.V12.I1.PP41-50
[8] Elpriza, R. F., Al Tahtawi, A. R., & Yahya, S. Perancangan dan Implementasi Pengereman Regeneratif pada Simulator Mobil Listrik Berbasis Motor Arus Searah. In Prosiding Industrial Research Workshop and National Seminar (Vol. 13, No. 01, pp. 711-717). (2022, August). https://doi.org/10.35313/irwns.v13i01.4317
[9] Elmorshedy, M. F., Almakhles, D., & Allam, S. M. Improved performance of linear induction motors based on optimal duty cycle finite-set model predictive thrust control. Heliyon, 10(13). 2024.
[10] Jin, H., Liu, G., Li, H., Chen, B., & Zhang, H. A fast commutation error correction method for sensorless BLDC motor considering rapidly varying rotor speed. IEEE transactions on industrial electronics, 69(4), 3938-3947. 2021. https://doi.org/10.1109/TIE.2021.3070493
[11] Mohanraj, D., Gopalakrishnan, J., Chokkalingam, B., & Mihet-Popa, L. Critical aspects of electric motor drive controllers and mitigation of torque ripple. IEEE Access, 10, 73635-73674. 2022. https://doi.org/10.1109/ACCESS.2022.3187515
[12] Gandhi, Y., Modh, D., Kishan, N., Parmar, R., & Panchal, N. Review Paper on Eddy Current and Electromagnetic Brake. International Journal of Engineering Research & Technology (IJERT). 10(1). 2021
[13] Zhao, X., Zhang, Y., & Ye, L. Braking torque analysis and control method of a new motor with eddy-current braking and heating system for electric vehicle. International Journal of Automotive Technology, 22, 1159-1168. 2021. https://doi.org/10.1007/s12239-021-0103-6
[14] Duan, X. and Naterer, G. F. Heat transfer in phase change materials for thermal management of electric vehicle battery modules. Int. J. Heat and Mass Transfer 53, 23–24, 5176–5182. 2010. https://doi.org/10.1016/j.ijheatmasstransfer.2010.07.044
[15] Rifa’i, A. F., Rudiansyah, H., & Milanto, R. Design and Implementation of Auto-limit Riding Speed System for Electric Motorcycles Based on Battery Level with Fuzzy PID. In 2022 7th International Conference on Electric Vehicular Technology (ICEVT) (pp. 27-33). IEEE. 2022, September. https://doi.org/10.1109/ICEVT55516.2022.9925008
[16] W. F. Syafra, P. Purwantono, H. Hasanuddin and A. K, "Power consumption analysis of a BLDC 24V 250W electric bike on an assembled lithium-ion battery pack", MOTIVECTION: Journal of Mechanical Electrical and Industrial Engineering, vol. 2, pp. 1-10, September 2020. https://doi.org/10.46574/motivection.v2i3.63
[17] A. Braun and W. Rid, "Assessing driving pattern factors for the specific energy use of electric vehicles: a factor analysis approach from case study data of the Mitsubishi i–MiEV minicar", TRANSPORT RES D-TRE, vol. 58, pp. 225-238, January 2018. https://doi.org/10.1016/j.trd.2017.11.011
